Ubique Alloys Pvt. Ltd is a leading exporter and manufacturer of Inconel Alloy 601 Bolts, which is available to our esteemed clients at market leading prices. Low-carbon version preferred to Inconel 601 Hex Head Bolts is used for applications involving exposure to temperatures above 315 Degree C (600 Degree F). Hot working temperatures for Inconel 601 Square Bolts should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F. Cold working for Inconel 601 U Bolts is readily accomplished with standard tooling. The resistance of Inconel 601 Eye Bolts against mineral acids varies depending on temperature and concentration and on whether the solution is ventilated or not. The aforementioned corrosion resistance means that Inconel 601 T Bolts is often used when handling food or synthetic fibres. Inconel 601 Hex Bolts is often used in environments containing alkalis, and it has varying use in sulfuric, hydrochloric, anhydrous hydrofluoric and non-aerated organic acids. Inconel 601 Lag Bolts both resist corrosion by distilled, natural water and flowing seawater but are attacked by stagnant seawater. Controlled atmospheres for Inconel 601 Counter Sunk Bolts should be used to maintain the metal’s appearance. Because of its low carbon content, Inconel UNS N06601 Bolts may be considered for service above 600 Degree F (316 Degree C), where higher carbon content is not recommended.