Ubique Alloys Pvt. Ltd is a well-known exporter, stockist and manufacturer of Inconel Alloy 925 Bolts, which is highly resistant to corrosion. Typical applications of Inconel 925 Hex Head Bolts are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; etc. Inconel 925 Square Bolts has good mechanical properties from sub-zero temperatures up to about 550 Degree C and is free from chloride induced stress-corrosion cracking. Generally, in nickel base alloys, the formation of second phase particles makes Inconel 925 U Bolts stronger, abrasive and difficult to machine. Inconel 925 Eye Bolts is a ductile Nickel-Copper alloy with resistance to a wide variety of corrosive conditions. Fouling in Inconel 925 T Bolts may occur followed by pitting but this pitting slows down after a fairly rapid initial attack. As would be expected from its high copper content, Inconel 925 Hex Bolts is rapidly attacked by nitric acid and ammonia systems. Inconel 925 Lag Bolts is resistant to most alkalis, salts, waters (including saline or brackish), food products, organic substances and atmospheric conditions at normal and elevated temperatures. Inconel 925 Counter Sunk Bolts are used in many different types of structural, mechanical, and general engineering applications. In no event should Incoloy 925 Bolts be heated above 2150 Degree F (1175 Degree C). Inconel UNS N09925 Bolts is often chosen to handle sulfuric acid through concentration at room temperature.