Ubique Alloys Pvt. Ltd is a leading trader of Inconel 600 Stud Bolts, which can be hot formed to any shape and formed cold by all methods. The lower carbon content of Alloy 600 Stud Bolts makes the material resistant to graphitization and therefore less subject to embrittlement. Those who use Nickel-Alloy 600 Stud Bolts find it desirable in deep drawing, spinning, and coining, because high-speed-steel tools are recommended. This enables a customer to utilize the strength of Inconel UNS N06600 Stud Bolts with the stability of compositional controls. Heat treatment of Inconel WNR 2.4816 Stud Bolts is normally performed at the temperature range from 760 Degree C to 1050 Degree C followed by being quenched in water or rapidly cooled by other means. Nickel-Chromium 600 Stud Bolts can be used in a variety of applications such as Chemical Processing and Storage, Synthetic Fiber Production, etc. Inconel 600 Stud Square Bolts is also used in the aerospace, petrochemical, power generation and marine/offshore engineering industries. Inconel 600 Stud Hex Bolts have excellent resistance against many corrosive media, in particular hydrofluoric acid and alkalis. Inconel 600 Stud Eye Bolts are highly ductile across a wide temperature range and can be easily welded and processed by standard shop fabrication practices. Inconel 600 Stud Lag Bolts has a low work-hardening rate, but it may be cold worked to moderately high strength levels while maintaining ductility.