Ubique Alloys Pvt. Ltd is a prominent exporter, trader and supplier of Nitronic 50 / 60 Round Bars, which is a high purity nickel alloy commonly used for electrical resistant thermometers. Nitronic 50 Round Bars also has a high curie temperature and good magneto-astrictive properties. Nitronic 60 Round Bars also gives excellent service in flowing sea water even at high velocity, but in stagnant or very low velocity sea water severe local attack may occur under fouling organisms or other deposits. Annealing of Nitronic 50 Flat Bars should be performed at a temperature between 1300 Degree F and 1600 Degree F. Nitronic 60 Square Bars is also used in the electrolytic extraction of caustic soda from salt solutions and the subsequent concentration processes. Nitronic 50 Threaded Bars both resist corrosion by distilled, natural water and flowing seawater but are attacked by stagnant seawater. Annealed Nitronic 60 Hollow Bars has a low hardness and good ductility and malleability, because those attributes, combined with good weldability, make the metal highly fabricable.

In hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates of Nitronic 50 Hexagonal Bars will be initially high but will decrease with time if conditions favor the formation of a protective film. Care should be taken for Nitronic 60 Triangular Bars when choosing the anneal temperature as time-at-temperature for this can greatly influence the mechanical properties and structure of the material.